Pipes
NORDISCAN-PI-LSAW
Equipment for automatic ultrasonic in-line examination of LSAW pipes
Salient Features
- Type of probes – conventional and Phased Array probes
- Meets all the internationally recognized standards & specifications including DEP 31.40.20.37 – February 2023 (adopted IOGP), International Association of Oil & Gas Producers (IOGP) IOGP S-616 Ver1.0 (2019), Ver2.0 (2022) “Supplementary Specification to API Specification 5L and ISO 3183 Line Pipe” DNV-ST-F101- 2021 ASTM-E-317:2021 GS EP PLR 202 Rev.8 “Fabrication of longitudinally submerged arc welded pipes for pipelines (sweet service)”
Specifications of pipes to be tested
- Diameter 406 mm – 1524 mm
- Wall thickness 6 mm – 60 mm
- Material carbon steel, all grades of API 5L
- Test capacity – up to 15 pipes per Hour
NORDISCAN-PI-ERW
Equipment for automatic ultrasonic in-line examination of ERW pipes (Body + Ends)
Salient Features
- Type of probe – Multi-channel array probes
- Coverage – all body including ends
- Sensitivity according to API 5L and other Standards and specifications for ERW pipes
- Test capacity – up to 160 pipes per hour
Specifications of pipes to be tested
- Diameter 80 mm – 570 mm
- Wall thickness 4 mm – 30 mm
- Material carbon steel, all grades of API5L
NORDISCAN-PI-W
Equipment for automatic ultrasonic in-line examination of ERW pipes (weld + HAZ inspection)
Salient Features
- Type of probe single crystal angle probes or phase array UT-probes
- Sensitivity SDH 1.6 mm, up to N5
- Automatic tracking of weld seam
- Fully automatic calibration
- Meets all international specifications
Specifications of pipes to be tested
- Diameter 80 mm – 570 mm
- Wall thickness 4 mm – 30 mm
- Material carbon steel, all grades of API 5L
NORDISCAN-PI-S
Equipment for automatic ultrasonic in-line examination of SEAMLESS and ERW pipes
Salient Features
- Type of probe -multi-channel UT array probes
- Pipes move and rotate
- Sensitivity according to API Spec 5 DP and other standards for seamless pipes
- Test Capacity-up to 200 pipes per Hour
Specifications of pipes to be tested
- Diameter 32 mm – 426 mm
- Wall thickness 3 mm – 40 mm
- Material carbon steel, API grades
NORDISCAN-PI-WT
Equipment for automatic ultrasonic in-line non-contact wall thickness measurement
Salient Features
- Type of probe EMAT (non-contact)
- Wall thickness accuracy, up to 10μ + 2R
Specifications of pipes to be tested
- Diameter 70 mm – 500 mm
- Wall thickness 0.5 mm – 50 mm
- Material – most of metals, including cast pipes
