Phased Array And TOFD Solutions
Gekko
M2M Gekko® is a field-proven flaw detector offering PAUT, UT, TOFD and TFM through the streamlined user interface Capture™. Released in 32:128, 64:64 or 64:128 channel configurations, Gekko combines high-resolution and speed while reducing inspectors’ training time.
Applications
- Multi-group weld inspection procedures fully covered
- HTHA and hydrogen damages inspection with TFM
- Thick welds and CRA/stainless steel weld inspection enhanced with 128-element aperture
- Corrosion mapping of large areas (up to 5 × 5 m [16.4 × 16.4 ft.] / 1 mm [0.04 in] step)
- Complex geometry dedicated solution for nozzle and fillet welds (Y and T joints)
Mantis
M2M Mantis is a robust and lightweight flaw detector offering UT, PAUT, TOFD, and TFM through the streamlined user interface called CaptureTM. Based on a 16:64PR architecture with three different models, Mantis addresses both general and advanced applications without compromising productivity.
- 16:64PR architecture plus two UT channels verified with international standards
- Compatible with existing phased array probes (linear, dual linear, and dual matrix array) and existing scanners (up to three encoder axis)
- Embedded focal law calculation (sectorial, linear, compound) on all parts through Capture software
- Up to eight group configurations
- High inspection speeds thanks to PRF up to 20 kHz
- Real-time FMC/TFM with up to 64 elements for code compliant inspections
Panther 2
M2M Panther combines the speed required for industrial integrated Phased Array Ultrasound (PAUT) solutions, with the most complete set of Total Focusing Method (TFM) imaging techniques, making it the ultimate tool for R&D and procedure qualification.
- From 32:128 to 2048:2048 configurations, M2M Panther compact units are scalable for automated inspection. With up to 16 units used in parallel, M2M Panther offers a substantial increase in inspection speed.
- Unlimited number of probes
- Unlimited number of groups
- Up 13k+ focal laws
- M2M Panther is IP54. Its casing has external fans for optimized heat dissipation with no air intake.
Capture
Capture is the streamlined software embedded in M2M Gekko and Mantis portable flaw detectors, and also available for PC. It is dedicated to conventional Ultrasonic Testing (UT), Phased Array UT (PAUT), Time-of-Flight-Diffraction (TOFD), Total Focusing Method (TFM) and Adaptive Total Focusing Method (ATFM). Continuously updated based on industry feedback, be the best inspector you can be.
Salient Features
- Intuitive and efficient workflow
- Code-compliant TFM at industrial scan speed
- Dedicated solutions for complex geometries
- One software covering all your PAUT/TOFD inspection
- Advanced analysis simplified
- Continuous innovation driven by market applications
