Ultrasonic Immersion Scanners
We provide fully automated Immersion Ultrasonic Testing Systems for effective inspection of various components. Our systems range from small tanks for laboratory immersion ultrasonic testing to large multi-axis industrial ultrasonic immersion systems & squirter gantry systems. With our systems you can perform manual immersion ultrasonic testing or advanced and automated immersion ultrasonic testing with contour following or full 3D inspection for your complex components. Single element or Phased Array ultrasonic transducers can be used on all our immersion systems and tanks. Our immersion ultrasonic testing systems are used for detection of flaws in metallic and composite materials. Ultrasonic C-scan and tomography are achieved using these automated ultrasonic testing systems by raster scanning the inspected samples with appropriate ultrasonic transducers.
TecView™ UT NDT Data Acquisition & Analysis Software
TecView™ UT is a complete software system solution which allows you to perform non-destructive Automated Ultrasonic Testing (UT) of material. It is designed for managing the entire procedure of Ultrasonic Testing including scanner motion control, data Acquisition and data Analysis. It is also user-friendly and has intuitive menu design which makes it easy to understand and navigate through. TecView™ UT supports many common Pulser/Receiver and Digitizer cards. TecView™’s UT primarily components are the Inspection and Analysis modules.
This Ultrasonic software assists with the task of performing UT inspection from start to finish. It includes data acquisition, data management, robotic control, imaging, analysis, and interpretation modules. All these operations could be performed simultaneously. This modular software package consists of two main components: an Acquisition as well as a data Analysis module.
The ACQUISITION module aids the user in the setup of all scanning parameters, from controlling the transducer motion all the way to setting all the gates and Ultrasonic parameters. With the data stored and tagged, the analysis of the collected data may be performed in the ANALYSIS module. Partial or full C-Scan in addition to A-Scan and B-Scan images are obtained with a click of the mouse. The C- Scans can be obtained based on amplitude information, TOF or thickness. Signal and image filtering, as well as rotation, inversion and 3D projection can be performed on the C-Scans.
TecView™ 3D
TecView™ 3D is a NDT software featuring basic and advanced contour following capabilities. This software is designed to perform inspection of curved structure while keeping constant orientation and separation of the probe with regards to the structure. The basic contour following capabilities of TecView™ 3D is perfectly suited for extruded parts or similar structures, while the advanced 3D scanning is designed to permit automated inspection of more complex parts with a complete tri dimensional surface following.
Contour following begins with the activity to interactively “teach” the geometry of the tested specimen TecView™ software. The teaching method is quick & efficient, particularly for parts with smooth curvatures. A mesh of the part is then defined in order to ensure constant scanning resolution during the scan. The system therefore “learns” how to perform the inspection based on the taught geometry. This method assures full inspection of the entire part with complex geometries. Part definitions obtained during the teaching process can be further recalled to inspect identical pieces, or refined for similar parts.
